|
Find Similar Products in:
|
|
|
|
|
| SWITCHLINC RELAY 2-WAY (WITH BOOSTERLINC), WHITE |
| Item# 23883W |
|
|
|
|
|
|
Overview
|
- 80% quieter than other relay switches
- Natural high-quality feel, compared to other brands
- Remote control capability brings added convenience, money savings and resale value to your home
- Whole-house scenes create elegant settings in your home
- 2-Way communications ensure lights go on and off exactly as wanted
Essential Info
SwitchLinc Relay — The Ultimate Remote Control Switch
Make your home the envy of your friends and neighbors with the sophistication and elegance of the SwitchLinc 2-Way Relay — the ultimate X10-compatible switch. SwitchLinc switches fill your entire home with personalized mood lighting for any occasion.
Manuals/Software
What's Included
SwitchLinc 2-Way Relay, White
Owner's Manual
2 mounting screws
5 wire nuts
|
More Info
|
Built with a Quieter Relay
Because the SwitchLinc Relay is built with a much quieter relay, it has a click that's more than 80% quieter than traditional relay switches. This allows you to remotely control lights or other non-dimmable devices without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the internal relay is barely noticeable, and not much louder than the click of the front paddle.
Generates Less Heat
Unlike the triac-based switches, SwitchLinc Relay uses a hard-contact relay to control the load. The other switches use a semiconductor (called a triac) that absorbs about two volts of power and dissipated the heat it through the front of the switch. By using a relay, the switch runs cooler and full voltage get to the load.
Scene Lighting — Change the Lighting to Match Your Mood
Scenes allow you to control multiple lights, rooms or even the whole home with a single X10 command. All member lights will ramp to your independently desired levels at your chosen ramp rate(s). Because the SwitchLinc Relay can be a member of up to 64 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various mood lighting scenarios with a single button press. These are elegant features usually found only in systems costing thousands of dollars and requiring extensive rewiring of your home. To create the equivalent of scenes with other X10 switches, you'll need a separate automation controller, which adjusts each light one-at-a-time, taking longer, increasing the likelihood of errors due to signal collisions and creating a chaotic series of lighting adjustments.
True Rocker Action & Beautiful, High Quality Construction
Unlike other X10-compatible switches, the SwitchLinc Relay offers the natural feel of high-end switches: tap the top to turn lights on, tap the bottom to turn lights off. Other X10 switches only respond to pressing the bottom. You'll also love the crisp, tactile response with each touch, instead of the mushy feeling of other brands. The SwitchLinc is designed and manufactured to high-end specifications and goes through over 10 quality control tests. You'll thank yourself for choosing this premium quality product.
Fully X10 Compatible
SwitchLincs can be controlled from any X10 transmitter. Unlike some switches, SwitchLinc responds to all the standard X10 commands.
Night / Status Light
A small, subtle green LED at the top of SwitchLinc makes it easy to find in a dark room. The LED blinks in response to X10 signals making installation and troubleshooting simple.
Easy to Install and Set Up
SwitchLinc wires in like a standard wall switch, with an additional connection to a neutral wire. To set the X10 address, press and hold the set-button for 5 seconds then send it the X10 address from any X10 compatible transmitter. To set the primary on level, adjust it to the desired brightness level and single tap the set button. To set the ramp rate, brighten the light to a level corresponding to the desired ramp rate and double tap the set button. All features/options can be set up remotely using an X10 transmitter (except the base address).
Create Virtual 3 & 4-Way Circuits & Control Other Devices
SwitchLinc allows you to customize your lighting setup no matter how your house is wired. Install SwitchLinc 2-Way without connecting a load and program its base address the same as another X10 compatible light switch and you've created a virtual 3-Way circuit. To move a switched outlet without rewiring the circuit, simply replace your switch with SwitchLinc 2-Way and plug a LampLinc or ApplianceLinc into the desire outlet. Another popular application is to integrate an intelligent controller with SwitchLinc 2-Way allowing you to turn all lights off in response to a double tap.
3- & 4-Way Ready
Simply add a SwitchLinc Multi-way Companion to build a 3-way circuit, add two of them to build a 4-way circuit, add three for 5-way, etc. The multi-way companions simply connect to the yellow wire on SwitchLinc 2-Way.
15 Amp Capacity
Maximum load is 15-amps for resistive loads, 480-watts for incandescent and inductive loads.
Power Failure Features
All SwitchLinc settings are stored in static memory and are not lost during power failures. Additionally SwitchLinc will return to its last brightness level upon a power restore.
2-Year Warranty
Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty. Increase your warranty from 2 years to 7 for a nominal fee. Check the box above.
Safety Tested and Factory Certification
All SwitchLinc products are safety approved. The assembly line for Smarthome Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.
No Neutral Wires Available in your House?
Try SwitchLinc RX Dimmers
Need a Trim Plate?
Be sure to order a trim plate for each SwitchLinc dimmer switch.
|
Specifications
|
Specifications | | Smarthome Design Product No.: | 23883w | | Color: | White | | Voltage & Frequency: | 120VAC, 60Hz | | Dimensions: | 1.73"w x 4.14"h x 1.73"d (front bracket)
1.74"w x 2.71"h x 1.40"d(main body) | | Maximum Load: | 15 amps for resistive loads,
480 watts for incandescent & inductive loads | | Minimum Load: | No minimum load required | | Circuit Types: | Single pole / 3, 4 and 5-way ready | | Operating Temperature: | 40°F to 104°F | | Neutral Connection: | Required | | Controllable Device Types: | Incandescent, fluorescent and inductive loads | | Warranty: | 2 years (7-year warranty available for purchase) |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|
|