Dealer Login
Dealer Benefits
 
FREE Dealer Referral Program

Click here to Request a Catalog
>> Dealer Application
>> Dealer Catalog
pic Referral Program
>> INSTEON Training Schedule

pic

Elegant INSTEON KeypadLinc With Custom-Etched Buttons is Mounted in a Convenient, Portable Tabletop Enclosure
INSTEON KeypadLinc Tabletop Controller with 8 Custom-Etched
INSTEON KeypadLinc Tabletop Controller with 8 Custom-Etched Buttons

KeypadLinc - INSTEON Tabletop Controller with 8 Custom Etched Buttons
Item# 2486PC8
Log in for Dealer Price.
Direct Ship
Add to Wish List

Overview
  • INSTEON KeypadLinc comes pre-installed in an elegant enclosure for remote control of your home's lighting from any night stand or table top
  • Monitor and control eight different devices or sets of devices
  • Once set up, you can unplug and move the controller to any room without losing programming
  • Personalized buttons specifically indicate controlled lights or rooms

Essential Info

If you have a complete INSTEON network installed in your home to control lighting and appliances remotely, you're already enjoying the convenience of controlling multiple lights and appliances from a single location. With multiple control options, it can be difficult to decide between the beautiful elegance of an INSTEON KeypadLinc wall-mounted controller and the convenience of an INSTEON ControLinc Tabletop Controller. Get the full advantage of both with the INSTEON KeypadLinc Tabletop Controller with 8 Custom-Etched Buttons. This set includes an INSTEON KeypadLinc Dimmer along with a Keypad Tabletop Enclosure, an attractive, portable enclosure that allows full use of a KeypadLinc while allowing the freedom to place the plug-in controller in any room of your home. Best of all, this set allows you to custom order buttons to be laser-etched with your specifications for the ultimate in personalization; and we assemble it for you!

Manuals/Software

What's Included

  • INSTEON KeypadLinc V2 Dimmer
  • Quick-Start Guide
  • 2 mounting screws
  • 3 wire nuts
  • White trim frame

  • Enclosure lid and base
  • 2 enclosure screws
  • 3 wire nuts
  • Strain relief grommet
  • Power cord
  • Quick-start guide

  • 8 custom buttons

    • More Info

    Personalizing Laser-Etched Keypad Buttons
    Please follow these instructions to order your Custom Keypad Buttons:

    1. After submitting your order, follow the link at the top of the "thank you" page to go to the Customization Form.

    2. After completing this form, you will receive a confirmation e-mail with your customization order details for your records.

    3. Your custom buttons will be created and will arrive along with your KeypadLinc Dimmer via United States Postal Service within 10 to 14 business days.

    4. Please note: Due to the nature of the customization of each product, all sales are final. Returns will only be accepted due to an error on the part of Smarthome.

    Customization Process Explained: Laser etching your custom labels onto the Custom Keypad Buttons requires a careful, detailed process to ensure your satisfaction. Buttons are secured on a template and placed into our laser etcher. Your designated text is copied directly from the invoice and inputted manually into the computer, and the laser then etches your buttons with your selected text. The template is removed from the laser etcher, and the buttons are prepped, painted, and set to dry. The buttons are polished to a high shine after any excess paint is removed. All Custom Keypad Buttons go through a careful quality-control process before the buttons are packaged and shipped to your home.

    When placing your order, please note:

  • Etching space on small buttons is limited to 7 characters per line, with a maximum of 2 lines per button
  • You will select black or white buttons on the order form; please note that the tabletop enclosure will match the button color* you select

    This set is also available in an 6-button version.

    * Please note that at this time Black buttons completely block the light from the LED indicators. It is recommended that you use this color only in locations where the lights/appliances you are controlling are visible from the controlling keypad.

    Each button is laser-etched with your detailed room description. Smarthome is unable to accept returns on special-order items. For more information, please see our return policy.

    Easy Setup
    The INSTEON KeypadLinc with Custom-Etched Buttons will arrive fully installed in the Tabletop Enclosure. Plug the enclosure into any non-switched outlet. You'll be able to link the individual keypad buttons to lights or groups of lights in your home for remote control of lights and scenes at the press of a button. Once configured, this portable controller can be unplugged and moved anywhere in your home without losing its programming.

    The Keypad Tabletop Enclosure is also available to be purchased separately.

    For more details on the INSTEON KeypadLinc, click here.

    		•

    Specifications

    Tabletop Enclosure Specifications

    Brand:Smarthome
    Manufacturer:SmartLabs Design
    Manufacturer Product No.:2402WH (white) or 2402BK (black)
    Dimensions:4 1/2" D x 2 1/8" W x 2 1/2" H
    Power:120V AC, 60Hz

    KeypadLinc Specifications

    General
    Brand:Smarthome
    Manufacturer:SmartLabs Design
    Manufacturer Product No.:2486D, INSTEON KeypadLinc Dimmer
    Warranty:2 years (Upgradeable to 7 years)
    Operation
    On-Levels:32 locally, 1% increments with software
    Ramp Rates, (full-ON to full-OFF):0.125 to 9 seconds if programmed locally, 0.125 seconds to 9 minutes if programmed remotely
    LED: Single LED at bottom of unit, indicates supplied power and signals programming cues
    Manual Operation Modes:INSTEON only, X10 only, INSTEON and X10 Combo Mode
    Combo Mode Message Order:INSTEON, X10, INSTEON cleanup
    Multi-Way Circuit Support:One KeypadLinc Dimmer controls load, Cross-Link any number of KeypadLinc Dimmers or other INSTEON Controllers
    Setup Memory:Non-volatile EEPROM
    INSTEON Features
    INSTEON Addresses:1 hard-coded out of 16,777,216 possible
    INSTEON Links:417 out of 16,777,216 possible
    INSTEON Powerline Frequency:131.65 KHz
    INSTEON Minimum Transmit Level:3.2 Vpp into 5 Ohms
    INSTEON Minimum Receive Level:1 mVpp nominal
    INSTEON Messages Repeated:Yes
    Mechanical
    Button Type:6 or 8 mechanical momentary contact type buttons
    Button Appearance:Transparent plastic caps, holding preprinted or custom button labels, with LED backlighting
    Wire Nuts:3 included
    Mounting:Mounts in single or multiple-ganged junction box.Controls 200 watts less load for each immediately adjacent electronic dimmer installed. For example, 600 watt load capacity becomes 400 watt with another electronic dimmer installed to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating
    Operating Conditions:Indoors, 40 to 104°F, up to 85% relative humidity
    Dimensions:4.1" H x 1.8" W x 1.2" D
    Weight:3.6 oz
    Electrical
    Supply Voltage:120 Volts AC +/- 10%, 60 Hertz, single phase
    Surge Protection:MOV rated for 150 Volts
    Power Wire Leads:6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
    Ground Lead:6", 18 AWG, stranded, bare copper
    Load Types:Wired-in incandescent lighting devices
    Maximum Load:600 Watts (uses 12-Amp triac dimmer)
    Minimum Load:No minimum load required
    Certification:Safety tested for use in USA and Canada (ETL #3059287-001)
    X10 Features
    X10 Primary Address:1 optional (comes unassigned)
    X10 Scene Addresses:255 possible
    X10 Status Response:Supported
    X10 Resume Dim:Supported (by setting Local On-Level to zero)
    X10 Powerline Frequency:121 KHz
    X10 Minimum Transmit Level:3.2 Vpp into 5 Ohms
    X10 Minimum Receive Level:20 mVpp nominal
    X10 Messages Repeated:No

    Reviews

    Accessories
    INSTEON SwitchLinc Dimmer  INSTEON Access Point (& Wireless Phase Coupler), 2 Pack  INSTEON Products   
    INSTEON SwitchLinc Dimmer  INSTEON Access Point (& Wireless Phase Coupler), 2 Pack  INSTEON Products   

    Related Items
    INSTEON KeypadLinc Tabletop Controller with 6 Custom Etched Buttons  INSTEON KeypadLinc with Black Tabletop Enclosure Kit  Keypad Tabletop Enclosure, Black  INSTEON ControLinc 
    INSTEON KeypadLinc Tabletop Controller with 6 Custom Etched Buttons  INSTEON KeypadLinc with Black Tabletop Enclosure Kit  Keypad Tabletop Enclosure, Black  INSTEON ControLinc 

    Customers Also Bought

    INSTEON KeypadLinc Dimmer with 8 Custom Etched Buttons  SwitchLinc - INSTEON Relay (Non-Dimming), White  KeypadLinc Color Frame Kit, Black  OutletLinc - INSTEON Remote Control Outlet, White 
    INSTEON KeypadLinc Dimmer with 8 Custom Etched Buttons  SwitchLinc - INSTEON Relay (Non-Dimming), White  KeypadLinc Color Frame Kit, Black  OutletLinc - INSTEON Remote Control Outlet, White 

    ORDERING
    Order Delivery Status
    Shipping Info
    Return Policy
    Contact Us
    Corporate Sales
    Retail Store
    Catalog Quickshop
    		MORE INFO
    Learning Center
    Getting Started
    INSTEON Training Schedule
    Affiliate Program
    Suggest a Product
    		ABOUT SMARTHOME
    About Us
    SmartLabs
    INSTEON
    Press Room
    Awards
    Careers
    		MORE SMARTHOME
    Smarthome Forum
    RSS
    Free Catalog
    Having difficulties with this page? Call us at 1-800-762-7846 or email: feedback@smarthome.com
    Place your order by 6:00PM ET for same day shipping (economy shipping excluded)
    Copyright 1995-2008 SMARTHOME
    RSS Feed
    HACKER SAFE certified sites prevent over 99.9% of hacker crime. Verisign Secure Site BBBOnLine Reliability Participation CEA Member