|
|
|
|
| Dinky Link Rectangular Mini IR Sensor - Black |
|
Item# 8120
|
|
|
|
|
|
|
Overview
|
- Works in normal 3-wire mode
- Talkback red LED blinks confirmation
- Black color blends with your TV or other components
Essential Info
This IR receiver is ideal for hidden mounting in the space behind speaker grills. Just point your remote at the speaker to control your system. Up to four can be connected in series; use a Xantech 1-Zone single-emitter or 4-emitter connecting block (sold separately) for emitter expansion. NOTE: The status LED on your IR repeater should only be lit when it is receiving an IR signal from your remote control. If you notice that the LED is always on, you may be getting interference from your television or the ambient light in the room. This will cause the system to overheat and will burn out prematurely. There are LCD and Plasma safe kits which filter out the interference coming from your television.
Important notes:
- Smarthome offers technical support on this product. We offer (2) ways to contact us for technical support: CHAT (homepage button: Mon-Fri 9:00am-6:00pm ET) or Phone: 1-800-762-7846 (Mon-Fri 9:00am-9:00pm & Sat 10:00am-4:00pm ET)
- Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
Manuals/Software
What's Included
Black IR sensor
Terminal block
Mounting tape
Instructions
|
Specifications
|
Specifications | | Manufacturer: | Xantech | | Manufacturer Product No.: | 480B-00 | | UPC: | 042777480012 | | Dimensions: | 7/16" x 5/16" x 2-1/8" (11m x 8mm x 54mm) | | Infrared Modulation Frequency Bandwidth: | 30 - 100kHz | | Nominal Reception Range: | >30 feet | | Nominal Reception Angle: | 55 degrees off axis | | Maximum Current Output: | 100mA | | Maximum Number of Directly Driven IR Emitters: | Up to four connected in series (Use Xantech Connecting Blocks for emitter expansion) | | Power Requirements: | 12 volts DC @ 10mA |
|
Reviews
|
|
|
Related Items
|
|
|
|
|
|