Know when your kids turn their bedroom lights on or off from a keypad in your bedroom
Parts list:
1
KeypadLinc
1
Dimmer (for incandescent lighting) or
Relay (for CFL or non-dimmable lighting)
SETUP
- Replace the master bedroom switch with the KeypadLinc - the large buttons will control the local load and you'll have four buttons available for controlling remote lighting.
- Replace your child’s wall switch with the dimmer or relay switch.
- Select a button on the KeypadLinc that you want to use as your indicator/controller for the kids room light and press and hold for 10 seconds. The keypad button will start blinking - you are now in programming mode.
- Go to the kids room and using a fingernail or small screwdriver and press and hold the set button for 5 seconds - the light should flash indicate successfull linking.
- Now when your child’s room light is turned on, the corresponding button on the keypad will be illuminated. If you want to turn it off just press the button.
Notes:
Before installing INSTEON wall switches and keypads be sure to check that you have neutral wires available behind your existing switches. These are commonly a group of white wires that are capped off in the back of the junction box.
Cart
